1440 frames – one day, one frame per minute1440 frames
24 hours around the world. A Vixen Labs production.24 hours around the world
frame 0000 of 1440

Field guide

05 · An SLR or mirrorless camera

Researched, not yet tested by us.

Most interchangeable-lens cameras made in the last several years have an interval timer built in. You set it to one frame per minute, tell it how many shots to take, and press start. The tricky parts are exposure across a whole day and night, and keeping the camera powered for 24 hours.

Where to find the interval timer

Maker Menu Notes from the maker's manual
Canon EOS Shooting tab > Interval timer > Enable Interval 00:00:01 to 99:59:59. No. of shots 01 to 99, or 00 to keep going until you stop it, on the R1, R3, R5, R5 Mark II, R6, R8 and R10; 0001 to 9999, or Unlimited, on the R6 Mark II, R6 Mark III, R6 V and R8 Mark II
Nikon Z and recent DSLRs Photo shooting menu > Interval timer shooting Interval, number of intervals, Exposure smoothing, Silent photography, Focus before each shot
Sony Alpha MENU > Shooting > Drive Mode > Interval Shoot Func. Shooting Interval 1 to 60 seconds, up to 9,999 shots, AE Tracking Sensitivity
Fujifilm X and GFX Shooting setting > Interval timer shooting Shots can be set to ∞; Interval timer shooting exposure smoothing
Panasonic LUMIX Rec (or Photo) menu > Still Recording Options > Time Lapse / Animation > Mode > Time Lapse Shot Image Count, Shooting Interval, Exposure Leveling
OM System and Olympus Shooting menu > Other Shooting Functions > Interval Shooting 2 to 9,999 frames, interval up to 24 hours, Exposure Smoothing

Menu names move around between models and firmware versions, so check your own camera's manual. The pages linked above are for one model each.

Two catches from these manuals:

  • Canon bodies that count only up to 99 shots, such as the R5 and R6, need the count set to 00, which keeps going until you stop it. Bodies such as the R6 Mark II take up to 9999, or Unlimited. Either way, stop it yourself after 24 hours. Canon also says that in autofocus mode the camera "will not shoot unless subjects are in focus", and that automatic power-off still applies unless you set it to Disable. Some Canon bodies, such as the Rebel T8i (850D) and the M50 Mark II, have only a time-lapse movie mode and no interval timer for stills.
  • Sony's longest interval is 60 seconds, which is exactly one frame per minute.

If your camera has no interval timer

  • A wired remote with a timer. Often sold as an intervalometer, it plugs into the camera's remote socket and presses the shutter for you. Make sure it fits your model's socket, and turn off the camera's automatic power-off so it is awake for each shot.
  • Sony PlayMemories apps. Some older Sony bodies, including the a6000 and the first and second-generation a7 models, took a downloadable time-lapse app. Sony ended downloads on August 31, 2025, but an app already on the camera still works.

Stills, not the time-lapse movie

Many cameras can also make a time-lapse movie in the camera. It saves work, but it often can't cover a whole day or play at 24 frames per second:

Shoot stills. You can count them, fix them, and make the film at exactly 24 frames per second. If your camera can save the stills and make a movie as well, as some Nikon bodies can, that's a handy preview.

Exposure from day to night

A fixed manual exposure set in daylight will turn black at night. Over 24 hours the camera has to change exposure by itself, and the simplest way is:

  1. Aperture priority (A or Av). Choose an aperture and let the camera pick the shutter speed.
  2. Auto ISO with a maximum. Set a ceiling, such as ISO 3200 or 6400, so night frames don't get too grainy.
  3. Exposure smoothing on, if your camera has it. Nikon, Fujifilm and OM System call it that; Panasonic calls it Exposure Leveling; Sony's equivalent is AE Tracking Sensitivity set to Low, which Sony says makes exposure changes smoother. Nikon's manual says that in mode M it has no effect unless Auto ISO is on.
  4. Interval priority on, if offered (Nikon's Interval priority, Sony's Shoot Interval Priority), so a long night exposure doesn't push frames off the one-per-minute schedule.

This isn't perfect. Gunther Wegner, who makes the LRTimelapse software, explains that in aperture priority the camera's metering gets less consistent in the dark and auto ISO raises ISO before lengthening the exposure, though he agrees it "might work in some scenarios". Professional "holy grail" day-to-night shoots adjust exposure by hand through dusk, which isn't practical for a camera left alone for a day. For this project, aperture priority with smoothing is the sensible choice, and you can even out what's left afterwards.

Keep night exposures well inside the interval. Canon's manual warns that shutter speeds longer than the shooting interval stop the camera shooting at the set interval, so a limit of about 30 seconds leaves a safe margin at one frame per minute.

Flicker

Even in a steady scene, frames can differ slightly in brightness. One cause is the aperture: the lens closes its blades for each shot and they don't land in exactly the same place every time. Enlaps suggests setting the widest aperture so the diaphragm stays open. For distant views, shooting wide open or close to it is usually fine. Any flicker that remains can be reduced afterwards; see From stills to a film.

Focus

  1. Focus on your subject with autofocus, or use magnified live view to focus by hand.
  2. Switch the lens or camera to manual focus, and leave it there.
  3. On Nikon, turn Focus before each shot off.
  4. A strip of tape across the focus ring stops it being nudged.

White balance

Automatic white balance keeps colors looking natural as the light changes, but can wobble from frame to frame. Nikon's time-lapse guide recommends a constant white balance. A fixed setting gives steady color, but street-lit night scenes will look orange. If you shoot RAW you can change white balance afterwards either way.

Image size and format

A 1080p film frame is about 2 megapixels and a 4K frame about 8.3 megapixels. A small or medium JPEG covers 1080p, and a medium JPEG of 4,000 pixels or more across covers 4K. RAW gives more room for correction, but each RAW file can be several times the size of a JPEG. See Power and storage for the sums.

Things that will stop the run

  • Automatic power-off. Disable it, especially on Canon.
  • Image review. Turn it off (Sony already hides it during interval shooting).
  • Stabilization. Turn off lens and body stabilization on a tripod.
  • The shutter. A silent or electronic shutter saves 1440 clicks of the mechanical one and makes no noise at night. Nikon calls it Silent photography; Sony offers Shutter Type in Interval.
  • Wi-Fi, Bluetooth and the eye sensor. Turn off what you don't need. On an SLR, close the eyepiece shutter or cover the viewfinder so stray light can't leak in.
  • Menus. On some cameras, changing settings mid-run ends it. Nikon warns that turning the camera off pauses shooting, and that a full card leaves the timer running without taking pictures.
  • Heat. Sony warns the camera may stop recording to protect itself if it gets hot. Keep it out of direct sun.

Power

A camera battery won't last 24 hours of interval shooting. Canon recommends household power outlet accessories for long sessions, Nikon lists a power bank among its recommended sources, Sony and OM System suggest USB power, and Fujifilm suggests its AC adapter. Power and storage covers dummy batteries, power banks and the arithmetic.

Mounting

Use the steadiest tripod you have, with the legs on firm ground. Hang a bag from the center column to weigh it down in wind. Put the lens hood on to keep off stray light and drizzle. Make sure the power cable is tied to a tripod leg, so a tug pulls the leg rather than the camera.

Tip: Press start, then watch for two frames before you walk away. It's the cheapest way to catch a camera that is waiting for focus, set to the wrong interval, or about to switch itself off.