1440 frames – one day, one frame per minute1440 frames
24 hours around the world. A Vixen Labs production.24 hours around the world
frame 0000 of 1440

Field guide

04 · A point-and-shoot

Researched, not yet tested by us.

An old compact camera is a fine way to shoot 1440 frames. It is small, quiet, and easy to hide, and if it has a built-in interval timer it will do the whole job by itself.

One way to do it: take an old point-and-shoot with an interval timer, put it on a tripod at a spot worth watching, give it power and a card big enough for the day, and leave it.

Does your camera have an interval timer?

Look through the shooting menus for anything with "interval" or "time lapse" in the name. If you don't have the manual, search for your camera's model name and "manual"; most makers keep them online. The names differ by maker:

Maker Look for Example
Nikon COOLPIX Continuous > Intvl timer shooting COOLPIX P1100 manual
Panasonic LUMIX Time Lapse / Animation > Time Lapse Shot Panasonic help
OM System and Olympus Interval Shooting, or Intrvl. Sh./Time Lapse OM-1 Mark II manual
Canon PowerShot Varies; many older models have none See CHDK below
Sony Cyber-shot Interval Shoot Func. on some recent models; an add-on app on some older ones RX0 II help guide

The Panasonic and OM pages above are for their interchangeable-lens cameras; their compacts often use similar names, but check your own manual. On the Sony models we looked at, the interval setting tops out at 60 seconds, which is exactly what you need.

Stills or the camera's time-lapse movie

Some compacts only offer a time-lapse movie mode, which takes the frames and hands you a finished video. These modes are usually built for short events. The COOLPIX P1100's time-lapse movie mode, for example, uses fixed scene presets and makes movies about 10 seconds long. Movie modes also tend to play at 30 frames per second rather than 24, and you can't check or fix individual frames.

Shooting stills at a known interval is safer. You can count them, drop a bad one, fix the colors, and build the film at exactly 24 frames per second. An in-camera movie is fine if the camera lets you choose a 60-second interval, runs for the full day, and you can get the result to play at 24 frames per second. Most compacts won't do all three.

Setting up the interval timer

The steps are similar on most cameras:

  1. Put the camera in P (program) mode, or A (aperture priority) if it has one. Avoid full auto and scene modes, which may block the interval timer or fire the flash.
  2. Turn the flash off. A flash firing every 60 seconds all night will spoil the film and annoy the neighbors.
  3. Set the zoom where you want it.
  4. Focus once and lock it (see below).
  5. Open the interval timer, set the interval to 1 minute (or 60 seconds, or 00:01:00) and the number of shots to unlimited, or to at least 1440.
  6. Start it, and watch the first two frames being taken.

On the COOLPIX P1100, for instance, you set the mode dial to P, S, A, M or U, choose Continuous > Intvl timer shooting, set the interval, and press the shutter. Nikon says it stops after 9999 shots, when the card fills, or when you press the shutter again.

If your camera has no interval timer

Canon PowerShot: CHDK

CHDK is a free add-on for many Canon PowerShot cameras, written by enthusiasts. It runs from the memory card and adds features, including scripts that work as an interval timer. The CHDK FAQ explains that it loads into memory "in a non-destructive, non-permanent way" and is gone when the camera turns off, unless you set the card to load it at startup. You put an intervalometer script in the CHDK/SCRIPTS folder on the card, load it from the scripting menu, and start it with the shutter button.

The same FAQ is honest about the risks: it "comes with no warranty", Canon support is quoted there as saying that non-Canon firmware would void the warranty, and while no case of damage has been confirmed, it is "theoretically possible". Each camera model and firmware version needs its own build, so check the supported list for yours.

Older Sony cameras: PlayMemories apps

Some older Sony compacts (such as the RX100 III to V and some HX models) took downloadable apps, including a time-lapse app. Sony ended downloads of PlayMemories Camera Apps on August 31, 2025, but apps already installed on a camera keep working. If a second-hand camera came with the app, use it.

An external timer

A few compacts have a socket for a wired remote. If yours does, a remote with a built-in timer (often sold as an intervalometer) can press the shutter every 60 seconds. Check the plug fits your model, and turn off the camera's automatic power-off so it is still awake for each frame.

If none of these work, a spare phone may be easier. See An old phone.

Exposure from day to night

A compact in P or A mode sets exposure for each frame by itself, which is what you want for a scene that goes from bright day to dark night. A few things help:

  • Cap the ISO. If the camera has an Auto ISO limit, set a maximum (often 1600 or 3200 on a small sensor). Above that, night frames get very grainy. The camera will use slower shutter speeds instead, which is fine on a tripod.
  • Keep the shutter shorter than the interval. Canon's manual warns that shutter speeds longer than the shooting interval stop the camera shooting at the set interval. At one frame per minute that leaves plenty of room.
  • Smoothing. Some cameras can soften jumps in brightness between frames. Panasonic calls it Exposure Leveling, which adjusts exposure to prevent large changes in brightness between adjacent frames. Turn it on if you have it.
  • Flicker. Small jumps in brightness from frame to frame show up as flicker. You can reduce it afterwards; see From stills to a film.

Focus

Compacts usually refocus for every shot, which can make the picture pulse or fail on a dark frame. Focus once on your subject, then switch to manual focus if the camera has it. Otherwise use a landscape or infinity focus setting for distant views, or an AF lock. Turn off the AF-assist lamp, which shines a light at the subject in the dark.

White balance

Automatic white balance follows the light as it changes, but colors can wobble from frame to frame. A fixed setting such as Daylight gives steadier colors, with warmer, more orange night scenes under street lights. Pick one before you start.

Image size and format

A 1080p film frame is about 2 megapixels and a 4K frame about 8.3 megapixels, so a medium JPEG is plenty. Smaller files also mean a smaller card and faster processing later. RAW is optional. Power and storage has the sums.

Things that will stop the run

  • Automatic power-off. Check whether the interval timer keeps the camera awake. If you use an external timer, set power-off to the longest time or turn it off.
  • Image review. Turn off the preview after each shot.
  • Screen. Let it turn off between frames if the camera allows; it saves power and heat.
  • Image stabilization. Turn it off on a tripod.
  • Beeps and focus lights. Turn them off for a quiet night.
  • Power. Small compact batteries won't last 24 hours. Some cameras run from USB power while switched on; others only charge over USB when they are off. Check your manual. Some need a dedicated adapter: the P1100's manual says to use only the EH-5d AC adapter.

Heat and cold

Small cameras heat up quickly in direct sun and their batteries fade in the cold. See Weather, theft and other hazards.

Mounting

Any small tripod with a standard screw fits nearly every compact. A bean bag or folded towel on a window sill also works. Make sure the strap can't blow across the lens, and that the power cable can't pull the camera out of line.